Alumabode Aluminum Hard Shell Pop-Up Rooftop Tent, 2~3 Person
- Alumabode™ is designed to mount to two rails that are at least 30 inches apart. Platform mounts are available, but not required, and can make installation trickier in some cases.
- On some makes of vehicles, the stock cross bar is too close to the roof to provide clearance for the mounting hardware. In these cases, we recommend that you contact our customer service team for resolution.
- The Alumabode™ weighs 136 lbs and your crossbar should be able to support the weight of the tent itself. Your cross bars are rated for dynamic loads (when your vehicle is traveling at highway speeds) and can hold 5-7 times that rated dynamic load when your car is parked. Almost all modern cars and crossbars can support the weight of the Alumabode™ and its occupant without any problem.
- Lift the Alumabode™ tent onto your crossbars (you'll need a friend or two) so that the large end of the Alumabode™ is facing the rear of the vehicle and the hinges are at the front of the vehicle.
- Make sure the Alumabode™ tent is positioned roughly where you want it. Usually if it looks in-game it's correct! For SUVs and hatchbacks, open your trunk and push the tent back until it just touches the open trunk. This way you can make sure the tent doesn't interfere with the operation of your trunk.
- Ready to install the kit.
- Using the 4 original mounting kits with U-brackets, slide each into the mounting rails, followed by the M8 bolt and plate kit. Repeat for each corner of the tent.
- Start with a partner in the front or back, then lift up the front or back and slide the mounting kit onto the inside of the crossbar, repeating for each corner.
- Thread the dangling M8 bolts through the mounting U-brackets, then hand-tighten the nuts to attach the mounting kit to the M8 bolts. Repeat for all four corners.
- Tighten the nuts evenly and snugly, making sure you have the Alumabode™ lined up exactly where you want it on the roof before tightening the nuts last. When your hardware is properly tightened, the bottom bracket around the bars will start to flex.
For more information please view our Manual, or contact the customer service team.
LTL-Truck Shipping
Logistics I Transit Time I Costs
LTL Shipping I 7-15 days I FREE

Alumabode RTT, 3 Person
FEATURES
- 60s Easiest Set Up
- With Top Mesh Organizer
- Oversized Doors on Both Sides
- Shell Just 8" for Aerodynamics
- Weights Minimal Impact on MPG
- Light-Suppressing Technology
- 100% Moisture Barrier
- No Need to Take Out Bedding
SLEEPS
2~3 Person
WEIGHT CAPACITY
1000 lbs
CLOSED DIMENSIONS
83" x 49" x 8"h
OPEN DIMENSIONS
83" x 49" x 35"h
MATTRESS SIZE
83" x 50" x 2"h
ACTUAL WEIGHT
136 lbs
WINDOWS
4 (w/ door)
TENT MATERIAL
- 600D Oxford & 280G Polyester
- PU 2000mm
- UPF 50+
RAINFLY MATERIAL
- 420D Oxford
- PU 3000mm
- UPF 50+
MATTRESS MATERIAL
High-Density 2" Foam
ENTRANCE MATERIAL
Panel & Mesh
UPPER MATERIAL
5/8" (16MM) Aluminum Poles
FLOOR MATERIAL
Reinforced Aluminum Tube Plate & Wooden
PARTS
- 7.5' Telescoping
- Stroge Bags
- Internal Storage Bags
HARDWARE
- Metric Wrench *2
- Hexagonal Spanner *2
- Track Plug *4
- Slide Plate *8
- Mounting Plate *4
- 55cm M8 Bolt *8
- M8 Nut *8
- Cam Lock *2

Alumabode RTT, 4 Person
FEATURES
- 60s Easiest Set Up
- With Top Mesh Organizer
- Oversized Doors on Both Sides
- Shell Just 8" for Aerodynamics
- Weights Minimal Impact on MPG
- Light-Suppressing Technology
- 100% Moisture Barrier
- No Need to Take Out Bedding
SLEEPS
3~4 Person
WEIGHT CAPACITY
1000 lbs
CLOSED DIMENSIONS
83" x 52" x 8"h
OPEN DIMENSIONS
83" x 52" x 35"h
MATTRESS SIZE
83" x 51" x 2"h
ACTUAL WEIGHT
165 lbs
WINDOWS
4 (w/ door)
TENT MATERIAL
- 600D Oxford & 280G Polyester
- PU 2000mm
- UPF 50+
RAINFLY MATERIAL
- 420D Oxford
- PU 3000mm
- UPF 50+
MATTRESS MATERIAL
High-Density 2" Foam
ENTRANCE MATERIAL
Panel & Mesh
UPPER MATERIAL
5/8" (16MM) Aluminum Poles
FLOOR MATERIAL
Reinforced Aluminum Tube Plate & Wooden
PARTS
- 7.5' Telescoping
- Stroge Bags
- Internal Storage Bags
HARDWARE
- Metric Wrench *2
- Hexagonal Spanner *2
- Track Plug *4
- Slide Plate *8
- Mounting Plate *4
- 55cm M8 Bolt *8
- M8 Nut *8
- Cam Lock *2

Rectangle Pop-up RTT, 3 Person
FEATURES
- 60s Quickly Set Up
- Anti-Condensation Design
- MPG Friendly
- With Easy Install Brackets
- Thermal iInsulation Shell
- More Storage Space
- No Need to Take Out Bedding
- Removable and Washable Mattress
SLEEPS
2~3 Person
WEIGHT CAPACITY
900 lbs
CLOSED DIMENSIONS
83" x 49" x 14"h
OPEN DIMENSIONS
83" x 49" x 35"h
MATTRESS SIZE
82" x 49" x 2"h
ACTUAL WEIGHT
156 lbs
WINDOWS
4 (w door)
TENT MATERIAL
- 600D Oxford & 280G Polyester
- PU 2000mm
- UPF 50+
RAINFLY MATERIAL
- 420D Oxford
- PU 2000mm
- UPF 50+
MATTRESS MATERIAL
High-Density 2" Foam
ENTRANCE MATERIAL
Panel & Mesh
UPPER MATERIAL
5/8" (16MM) Aluminum Poles
FLOOR MATERIAL
Reinforced Aluminum Alloy Frame & Wooden
PARTS
- 7.5' Telescoping
- Shoe Bags
- Stroge Bags
HARDWARE
- Metric Wrench *2
- Track Plug *4
- Slide Plate *8
- Mounting Plate *4
- 55cm M8 Bolt *8
- M8 Nut *8
- Elastic String *2
WHAT KINDS OF VEHICLES WOULD FIT IN RTT?
BENEHIKE Ascendll Rooftop Tent Installation & Use
Check out our installation video of the AscendII, Benehike's 2-3 Person RTT for you!

Custom-made Aluminum Alloy Shell
- The custom-made aluminum alloy shell is shaped with BENEHIKE® aesthetics to reduce wind resistance and noise while driving.
- Lighter weight, easier to install on the roof.
- Resistant to corrosion and rust, it can withstand harsh weather conditions and rough terrain.
- The flat design can carry more off-road gear, turning a boring minivan into an off-road beast!

Insulated Floors And Ceilings
Thermal control is essential for a restful night's sleep. We insulate the floor and ceiling of Alumabode™. An ingenious tube frame system is used on the floor to ensure your tent stays at the perfect temperature all night long.

All Season Protection
- External Tent 600GSM tarp material withstands harsh environmental conditions.
- The durable polyurethane coating is both water and UV resistant, protecting you from the elements.
- Whether you're backcountry camping or enjoying a day at the beach, our tent fabrics will give you the toughness you need to stay safe and dry.

Ultra Fast Setup
- The hydraulic props allow you to easily open the tent within 2 minutes, which means you can enjoy more time relaxing and spending time with your family.
- When closing the tent, you don't have to take the bedding out and clean out the contents, it stays inside.

Most Comfortable RTT Mattress
Camping doesn't have to be tough. Sleep on luxury mattresses comparable to California kings. a 2-inch high-density foam mattress allows you to sleep under the stars like a five-star hotel.

360° Views
Alumabode™ windows speak for themselves. 5 windows (doors included) for maximum views, gaze under the stars, or roll up all windows and let the morning breeze in, incredible views, air flow, and everything you need to stay safe from the elements.